Directed Electronics 50.7X Installationsanleitung

Responder LC Model 50.7XSecurity and Remote StartInstallation Guide This product is intended for installation by a professional installer onl

10© 2008 Directed Electronics. All rights reserved.Component locations and finding wiresFor detailed information on where to locate components, and how

11© 2008 Directed Electronics. All rights reserved.➢ Primary harness (H1), 12-pin connectorH1/1RED/WHITE (-) 200mA TRUNK RELEASE OUTPUTH1/2RED (+)12v

12© 2008 Directed Electronics. All rights reserved.➢ Heavy gauge remote start, (H3) 10-pin connectorH3/1PINK (+) IGNITION 1 INPUT/OUTPUTH3/2RED/WHITE

13© 2008 Directed Electronics. All rights reserved.the onboard remote start relays and are not diode isolated. If connecting these wires directly to t

14© 2008 Directed Electronics. All rights reserved.Wire connection guides➢ Primary harness (H1)H1/1RED/WHITE (-) 200mA TRUNK RELEASE OUTPUTWhen the sy

15© 2008 Directed Electronics. All rights reserved.H1/4WHITE/BROWN LIGHT FLASH -ISOLATION WIRE - PIN 87a of onboard relayThis wire connects to pin 87

16© 2008 Directed Electronics. All rights reserved.H1/6VIOLET (+) DOOR TRIGGER INPUTThis wire is used in vehicles that have a positive (+) switched do

17© 2008 Directed Electronics. All rights reserved.H1/10WHITE/BLUE (-) REMOTE START/ TURBO TIMER ACTIVATION INPUT This input comes from the factory se

18© 2008 Directed Electronics. All rights reserved.(+) Positive Light Flash Output(-) Negative Light Flash OutputWHITE H1/11(+) LIGHT FLASH OUTPUTWHIT

19© 2008 Directed Electronics. All rights reserved.Relay for Negative (-) Disarm Wire Relay for Positive (+) Disarm WireH2/2LIGHT GREEN/WHITE (-) 200m

Bitwriters with a date code of 6a or older require an IC upgrade (p/n 998M). Some bitwriters with a date code of 6B do not require the IC upgrade, ref

20© 2008 Directed Electronics. All rights reserved.Warning! Never use this wire to drive anything but a relay or a low-current input! This transistori

21© 2008 Directed Electronics. All rights reserved.Note: This feature needs to be programmed “On” to function correctly (see System Feature

22© 2008 Directed Electronics. All rights reserved.H2/8BROWN/BLACK (-) HORN HONK OUTPUTThis wire is low current output (200mA) and can be hooked to th

23© 2008 Directed Electronics. All rights reserved.H3/6RED (+) (30A) FUSED IGNITION 1 RELAY INPUTThis wire is the polarity feed for the Ignition1 rel

24© 2008 Directed Electronics. All rights reserved.➢ Remote start input - 5-pin connector1BLACK/WHITE (-) NEUTRAL SAFETY SWITCH INPUTConnect this wire

25© 2008 Directed Electronics. All rights reserved.5BLUE/WHITE (-) 200 mA 2ND STATUS/REAR DEFOGGERThis wire supplies a 200mA output as soon as the mod

26© 2008 Directed Electronics. All rights reserved.5BLUE (-) 200mA STATUS OUTPUT This wire supplies an output as soon as the module begins the remote

27© 2008 Directed Electronics. All rights reserved.Neutral safety switch interfaceSome vehicles do not have an electrical neutral safety switch. Inste

28© 2008 Directed Electronics. All rights reserved.Plug-in LED and valet/program switchThe LED and valet switch are incorporated into the control cent

29© 2008 Directed Electronics. All rights reserved.Alarm trigger inputs shorter than 0.8 seconds trigger the WarnAway response, while inputs longer th

ContentsWarning! safety first ...5What is included ...

30© 2008 Directed Electronics. All rights reserved.➢ Tach learningTo learn the tach signal:1. Start the vehicle with the key.2. Radious will be if

31© 2008 Directed Electronics. All rights reserved.D2D Jumper settingsThe security system has the ability to work with a compatible module through the

32© 2008 Directed Electronics. All rights reserved.Access door(Light Flash Fuse Jumper is under access door - use needle nose pliers to change fuse po

33© 2008 Directed Electronics. All rights reserved.At this point you can either re-adjust the sensor or press A U X or A U X to save and exit the prog

34© 2008 Directed Electronics. All rights reserved.Remote control Learn Routine™The system comes with a 1-way and a 2-way remote control that are alre

35© 2008 Directed Electronics. All rights reserved.After entering the setup mode on the remotes, use the following learn routine to add remote control

36© 2008 Directed Electronics. All rights reserved.Step Function2Delete remotes: This feature erases all remotes from the memory of the security syste

37© 2008 Directed Electronics. All rights reserved.Remote control configuration➢ Responder LC 2-way5319,&$)&&

38© 2008 Directed Electronics. All rights reserved.For more information about the remote control functions, see the Owners Guide. ButtonLeve

39© 2008 Directed Electronics. All rights reserved.1. Open a door. (The GREEN wire, H1/8, or the VIOLET, H1/6 must be connected.)2. Turn the ignition

Menu 1 - Security...41Menu 2 - Convenience ...

40© 2008 Directed Electronics. All rights reserved.Note: Some features have more than two possible settings. Pressing A U X or A U X toggles through

41© 2008 Directed Electronics. All rights reserved.Feature menusThe default settings are indicated in bold type.➢ Menu 1 - SecurityMenu Item Feature O

42© 2008 Directed Electronics. All rights reserved.➢ Menu 2 - ConvenienceMenu Item Feature Opt. 1 Opt. 2 Opt. 3 Opt.4 Opt. 5+1 One-time BypassOne time

43© 2008 Directed Electronics. All rights reserved.➢ Menu 3 - Remote startMenu Item Feature Opt. 1 Opt. 2 Opt. 3 Opt.4 Opt. 5+1 Transmission ModeManua

44© 2008 Directed Electronics. All rights reserved.Feature descriptionsThe features of the system are described below. Features that have additional s

45© 2008 Directed Electronics. All rights reserved.chirps that confirm the arming and disarming of the system, Arm/Disarm chirps ON, w/Warn Away chirps

46© 2008 Directed Electronics. All rights reserved. 1-9 Comfort Closure Off(1): The system can be programmed to close the win-dows when the system is

47© 2008 Directed Electronics. All rights reserved.➢ Menu 2 - Convenience2-1 One time bypass Off (1): One time bypass ON. When programmed On (2) the

48© 2008 Directed Electronics. All rights reserved.tional dome light supervision feature must be installed as described in the Wire Connection Guide.

49© 2008 Directed Electronics. All rights reserved.(4) Output, (5) Off: Aux 2 can be programmed for these output configurations. The unit is set to the

5© 2008 Directed Electronics. All rights reserved. Warning! safety firstThe following safety warnings must be observed at all times:Due to the complex

50© 2008 Directed Electronics. All rights reserved.age. If programmed OFF (3) the vehicle cranks for the programmed crank time (feature 3-3) and does

51© 2008 Directed Electronics. All rights reserved.“times out” when the remote start activates in timer mode. The system may be shut down using a shut

52© 2008 Directed Electronics. All rights reserved.module are added to the unit, it may be necessary to use the two-chirp setting to program this feat

53© 2008 Directed Electronics. All rights reserved.➢ Bitwriter®The Bitwriter® has the ability to fine tune certain features of the security system.

54© 2008 Directed Electronics. All rights reserved.Feature Default settingOptional settingsSmart start low battery 10.5 voltsOFF/12.5/12/11.5/11/10.5

55© 2008 Directed Electronics. All rights reserved.Long term event historyThe system stores the last two full triggers in memory. These are not erasab

56© 2008 Directed Electronics. All rights reserved.Table of zonesWhen using the Diagnostic functions, use the Table of Zones to see which input has tr

57© 2008 Directed Electronics. All rights reserved.7 flashes Timer mode/Turbo mode/Manual mode error *8 flashes Neutral safety shutdown9 flashes

58© 2008 Directed Electronics. All rights reserved.Remote start safety checkBefore vehicle reassembly, the remote system must be checked to ensure saf

59© 2008 Directed Electronics. All rights reserved.Troubleshooting➢ Alarm Shock sensor doesn’t trigger the alarm:•Has the NPC® system been triggered?

6© 2008 Directed Electronics. All rights reserved.After the remote start module has been installed, test the remote start module in accordance with th

60© 2008 Directed Electronics. All rights reserved.section of this guide.Status LED doesn’t work.•Is it plugged in? (See Plug-In LED and Vale

61© 2008 Directed Electronics. All rights reserved.The vehicle starts, but immediately dies.•Does the vehicle have an immobilizer? The vehicle’s immo

62© 2008 Directed Electronics. All rights reserved.No Parking Brake input, Black/white neutral safety wire not showing •ground with parking brake set

N5702X 2008-08Vista, CA 92081www.directed.com© 2008 Directed Electronics.—All rights reserved.

7© 2008 Directed Electronics. All rights reserved.What is includedRemote Control 2 way LCD - (p/n 7752X) •Remote Control 1 way companion - (p/n 7652X

8© 2008 Directed Electronics. All rights reserved.➢ D2DThe system has the ability to interface with an XK module through the D2D port. The advantage t

9© 2008 Directed Electronics. All rights reserved.➢ Doubleguard shock sensorSince the shock sensor is built into the main unit, be sure to keep the sh