Directed Electronics RSIII Installationsanleitung PDF herunterladen (Seite 9)

2003

Directed Electronics, Inc.

H1/3 WHITE/BLUE Activation Input

A momentary input on this wire will start or stop the motor, just as transmitting Channel 3 from

the transmitter/receiver does. It is often connected to an optional momentary push-button switch

to make activating Valet Take Over more convenient.

H1/4 BLACK/WHITE (-) 200 mA Domelight Supervision Output

Connect this wire to the optional domelight supervision relay as shown in the following diagram:

H1/5 GREEN (-) Door Trigger Input, Zone 3 and Door Icon

Most vehicles use negative door trigger circuits. Connect the GREEN wire to a wire showing

ground when any door is opened. When connecting to newer model vehicles there is generally a

need to use individual door triggers. See DirectFax document 1076 for wiring instructions. This

wire will report Zone 3.

NOTE: If using a door trigger wire that has a delay, Advanced Menu 2, feature 6, or the 998T

Bitwriter can be used to turn Bypass Notification off.

IMPORTANT! This output is only intended to drive a relay. It cannot be connected

directly to the domelight circuit, as the output cannot support the current draw of one

or more bulbs.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 43 44

Keine Kommentare

Directed Electronics RSIII Installationsanleitung Seite 9