Directed Electronics Valet 561T Installationsanleitung PDF herunterladen (Seite 28)

2288

ssyysstteemm ffeeaattuurreess lleeaarrnn rroouuttiinnee

Many of the features of this unit are programmable. They can be changed whenever necessary through this learn

routine. The Valet/Program switch, plugged into the blue port, is used together with a programmed transmitter

to change the settings.

TToo eenntteerr tthhee ffeeaattuurree lleeaarrnn rroouuttiinnee::

OOppeenn aa ddoooorr.. ((

The GREEN wire, H1/8, or the VIOLET, H1/6 must be connected.)

IIggnniittiioonn..

Turn the ignition on, then back off. (The H1/4 YELLOW switched ignition input

must be connected.)

CChhoooossee..

Within 10 seconds, press and release the Valet/Program switch the number of

times corresponding to the feature number you want to program (see the

Features Menu

section of this guide). Then press the switch once more and hold it.

The LED will flash and the siren will chirp to indicate which feature you have accessed.

TTrraannssmmiitt..

While

HHOOLLDDIINNGG

the Valet/Program switch, you can select the desired features

setting using the remote transmitter. Pressing the lock icon transmitter button while

HHOOLLDDIINNGG

down the Valet/Program switch will program the feature to the LED ON (default)

setting. The siren will chirp once. Pressing the unlock icon transmitter button while

HHOOLLDDIINNGG

down the Valet/Program switch will change the setting to the LED OFF setting.

The siren will chirp twice.

RReelleeaassee..

Release the Valet/Program switch.

TToo aacccceessss aannootthheerr ffeeaattuurree::

You can advance from feature to feature by pressing and releasing the Valet/Program switch the number of times

necessary to get from the feature you just programmed to the feature you wish to access. For example, if you

just programmed Feature 1 and you want to program Feature 2:

1. Release the Valet/Program switch.

2. Press and release the Valet/Program switch once to advance from Feature 1 to Feature 2.

3. Press the Valet/Program switch once more and

HHOOLLDD

it.

4. The siren will chirp two times to confirm that you have accessed Feature 2.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34

Keine Kommentare

Directed Electronics Valet 561T Installationsanleitung Seite 28