Directed Electronics Viper ESP 540 Installationsanleitung PDF herunterladen (Seite 80)

Using your system

Manual (active) arming

The factory default is active arming. You can activate or arm the system

by locking the doors with your factory keyless entry transmitter. When

the system arms, you will hear a short siren chirp and see the parking

lights flash once.

While the system is armed the status LED flashes about twice a second,

to show that the system is actively protecting your vehicle. If you hear a

second short siren chirp after arming, and the status LED is flashing in

groups, then go to Diagnostics section (page 9). This extra short siren

chirp is called Bypass Notification.

Automatic (passive) arming

The system also can be programmed to arm itself automatically (called

passive arming). If the system is programmed for passive arming, it will

automatically arm 30 seconds after the ignition is turned off and the

system “sees” you leave the vehicle by opening and closing a door.

Whenever the system is in its 30-second passive-arming countdown,

the status LED will flash twice as fast as it does when the system is

armed. When the system arms, you will hear a short siren chirp and the

parking lights will flash once. The doors lock (if connected and pro-

grammed for passive locking).

NNoottee::

If the ignition is turned on within 60 seconds of

arming the system, the system will automatically disarm.

NNoottee::

The system can be programmed to sound horn honks or

siren chirps. The horn is optional and may require additional

labor.

G3001L_2009-04print.qxd 5/12/2009 10:57 AM Page 3

25-Mar-10

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 177 178

Keine Kommentare

Directed Electronics Viper ESP 540 Installationsanleitung Seite 80