Directed Electronics Matrix 1 Installationsanleitung

MMaattrriixx 11IInnssttaallllaattiioonn GGuuiiddee© 2005 Directed Electronics, Inc. N909429 07-05

10©2005 Directed Electronics, Inc. all rights reservedDoor Lock Harness (H2), 3-PIN Connector_________NOTE: For detailed instructions about connecting

www.clifford.com11Valet/Program Switch, 2-Pin BLUE PlugThe Valet/Program button should be accessible from the driver’s seat. It plugs into the BLUE po

12©2005 Directed Electronics, Inc. all rights reservedMounting the Receiver/AntennaReceiver/antenna position should be discussed with the vehicle owne

www.clifford.com13On-Board Dual-Stage Shock SensorThere is a dual-stage shock sensor inside the control unit. Adjustments are made via the rotarycontr

14©2005 Directed Electronics, Inc. all rights reservedProgramming JumperLight Flash JumperThis jumper is used to determine the light flash output. In

www.clifford.com15H1/6 Blue wire, all trigger inputs except the door trigger input will remain bypassed until 5 secondsafter ground is removed from th

16©2005 Directed Electronics, Inc. all rights reserved1. OOppeenn aa ddoooorr.. (The H1/5 GREEN wire or the H1/7 VIOLET wire must beconnected.)2. I

www.clifford.com17To access another feature in the same menu:1. Press and release the Valet/Program switch the number of times necessary to advance fr

18©2005 Directed Electronics, Inc. all rights reservedSystem Features MenusMenu #1 - Basic FeaturesItems in bold text have been programmed to the defa

www.clifford.com19Feature DescriptionsThe features of the system are described below. Features that have additional settings that can beselected only

Bitwriter®, Code Hopping®, Directed®, Doubleguard®, ESP®, FailSafe®, Ghost Switch®, LearnRoutine™, Nite-Lite®, Nuisance Prevention®Circuitry, Revenger

20©2005 Directed Electronics, Inc. all rights reservedsetting is 0.8 second door lock pulses. For some vehicles a 0.4 second pulse duration is require

www.clifford.com212-3 FALSE ALARM CONTROL TECHNOLOGY (FACT) ON/OFF: FACT stops repeatedtriggering of the same zone. If one zone is triggered three tim

22©2005 Directed Electronics, Inc. all rights reserved2-9 DOUBLE/SINGLE PULSE LOCK:Some vehicles require two pulses on a single wire tounlock the door

www.clifford.com233. SSeelleecctt tthhee rreecceeiivveerr cchhaannnneell::Press and release the Valet/Program button thenumber of times necessar

CChhaannnneellss 44--66(available only when using a Radar Master remote)Channels 4 through 6 are used to assign the arm, disarm and panic functions t

www.clifford.com25...operates ...Arm/Disarm/Panic...operates ...

26©2005 Directed Electronics, Inc. all rights reservedSystem Status ChirpsTable of ZonesNOTE: The Warn Away®response does not report on the LED.Long T

www.clifford.com272. Turn on the ignition.3. Release the Valet/Program switch.4. Press and release the Valet/Program switch within 5 seconds. The LE

28©2005 Directed Electronics, Inc. all rights reservedOptional Vehicle Recovery System (VRS)VRS is an optional feature designed to disable a vehicle d

www.clifford.com29TroubleshootingStarter kill doesn’t work.➤Is the correct starter wire being interrupted? If the car starts when the starter kill rel

www.clifford.com3Table of ContentsWWhhaatt IIss IInncclluuddeedd ...

30©2005 Directed Electronics, Inc. all rights reservedWiring Quick Reference GuideLIGHT FLASH JUMPER(+) LIGHT FLASH OUTPUT (DEFAULT)(-) LIGHT FLASH OU

4©2005 Directed Electronics, Inc. all rights reservedWhat Is IncludedPrimary Harness (H1) Wire Connection GuidePrimary Harness Wiring Diagram_________

www.clifford.com5H1/1 ORANGE (-) ground-when-armed outputThis wire supplies a (-) ground as long as the system is armed. This output ceases as soon as

6©2005 Directed Electronics, Inc. all rights reservedH1/3 WHITE/BLUE 200 mA (-) channel 3 outputThis wire provides a (-) 200 mA output whenever the tr

www.clifford.com7H1/4 BLACK/WHITE (-) 200 mA domelight supervision outputConnect the H1/4 wire to the optional domelight supervision relay as shown in

8©2005 Directed Electronics, Inc. all rights reservedH1/7 VIOLET (+) door trigger inputThis type of dome circuit is used in many Ford products. Connec

www.clifford.com9H1/10 BROWN (+) siren outputConnect this to the RED wire of the Revenger®siren. Connect the BLACK wire of the siren to (-)chassis gro