Directed Electronics Matrix 1 Installationsanleitung PDF herunterladen (Seite 11)

www.clifford.com

Valet/Program Switch, 2-Pin BLUE Plug

The Valet/Program button should be accessible from the driver’s seat. It plugs into the BLUE port

on the side of the unit. Since the system features Valet® by using the remote transmitter, the button

can be well hidden. Consider how the button will be used before choosing a mounting location.

Check for rear clearance before drilling a 9/32-inch hole and mounting the button.The GRAY wire

in the two-pin plug may also be used as a (+) ghost switch input and can be connected to any (+)

switch in the vehicle. (See

Feature Descriptions

section of this guide.)

Programmer Interface, 3-Pin BLACK Plug

The BLACK three-pin port is provided for programming of the unit. When using the 998T

Bitwriter, it is possible to configure any and all of the programmable functions. For more infor-

mation please refer to the guide packaged with the programmer.

DIA-41

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 29 30

Keine Kommentare

Directed Electronics Matrix 1 Installationsanleitung Seite 11